- Styles and materials that don't quite fit between rooms.
- Wasted gaps due to commissioning each piece in isolation.
- Several suppliers, budgets and managers to coordinate.
- Deliveries and fitting on unrelated schedules.
- A global budget that is difficult to compare and control.
A project for the entire home
Custom furniture for a complete home in Finestrat
We can assist you inEspañolEnglishDeutschРусский
The aim is not to repeat one finish everywhere. It is to make each room useful while the colours, proportions and details still belong to the same home.
Measured survey · bespoke design · Manufacturing · Transport and fitting
01Project adapted to your home
02A single point of contact
03Custom furniture
04Professional installation
05Finestrat and surroundings
A common vision
What does a whole-home furnishing project include?
A whole-home furnishing project allows you to design and equip several rooms of a home in a coordinated manner. Instead of hiring the kitchen, wardrobes, living room and bedrooms separately, All the furniture is considered within one coordinated proposal, with compatible materials, finishes, proportions and phases.
At Finestrat we offer this service for new-build flats, renovated homes, apartments, chalets and second homes. The scope can bring together measurement, layout analysis, furniture design, choice of materials, manufacturing, delivery and fitting. each item is confirmed in writing before starting, so you know what stays are included and what decisions are pending.
Learn how we work →Less coordination, more clarity
Your entire home coordinated by a single team
The value is not in filling the house with furniture, but in making overall decisions before manufacturing each piece.
- A visual and functional line for the entire home.
- Coordinated materials, colours and opening systems.
- One point of contact and a common scope for stays.
- Manufacturing and installation organised within a schedule.
- itemised quotation to decide priorities sensibly.
How is it different from other services?
The custom furniture service in Finestrat can cover one piece or a single room. Whole-home furnishing brings several rooms, or the entire property, into one coordinated brief. It is not equivalent to a comprehensive renovation with masonry and installations, nor does it replace a complete decorative interior design project: it focuses on planning, manufacturing and installing the furniture included in the proposal.
Homes, not commercial premises
We furnish complete homes of different types
The distribution, the intended use and the phase in which the property is located change the way the project is organised.
New construction apartments
Furniture for an empty home: kitchen, wardrobes, living room, bedrooms and auxiliary areas within a common approach.
Renovated homes
Design adapted to the new distribution, the coverings, the existing services and the language of the renovation.
Chalets and single-family homes
Coordinated solutions for large rooms, work areas, dressing rooms and spaces with special geometries or heights.
Apartments and second homes
A functional and easy-to-maintain proposal, adapted to the habitual, seasonal or holiday use of the home.
Homes for rent
Priority for storage, resistance, simple maintenance and the investment available in each room.
Is it a store, office, restaurant or other business? see the dedicated page for custom commercial furniture.
Scope adapts
Which rooms can we include in the project?
You can bring together the entire home or select priority rooms. Each block is designed separately, but is decided as part of the same set.
Kitchen
Columns, pantries, islands, wall units and storage solutions adapted to installations and appliances.
made-to-measure kitchens →Living room and dining room
TV cabinets, bookcases, shelves, sideboards, display cabinets, benches and compositions integrated into architecture.
Living room furniture →Wardrobes and dressing rooms
Built-in wardrobes, sliding or folding fronts, dressing rooms and interiors configured according to what you need to store.
WardrobesDressing rooms →Bedrooms
Headboards, side tables, desks, wardrobes, folding beds and coordinated children's or youth furniture.
Custom bedrooms →Bathrooms and laundry
Furniture under sink, columns, auxiliaries and modules prepared to integrate washing machine, dryer and storage.
Bathroom furniture →Halls and hallways
Shoe racks, benches, panelling and shallow wardrobes to organize access and passage areas.
See halls →Office and home office
Desks, shelves, filing cabinets and technical backgrounds planned for comfortable day-to-day work at home.
Custom home office →Special spaces
Furniture under stairs, attics, pillars, setbacks and openings with measurements that do not allow a standard solution.
Solve a difficult gap →
Do you already know which rooms you want to furnish?
Tell us the priorities and we will prepare an initial guidance with a quotation by room.
No ambiguous items
What does our whole-home furnishing service include?
The final proposal confirms the exact scope. This way you can distinguish the furniture work, the possible accessories and the items that require another professional.
- Initial consultation and definition of priorities.
- Visit, access review and measurement.
- Analysis of distribution by room.
- Furniture design and selection of materials.
- Visual proposal suited to the agreed scope.
- Detailed quotation by room and items.
- Manufacture according to approved design.
- delivery, fitting, adjustments and final review.
Lighting integrated into furniture, mirrors, glass, countertops and other accessories can be priced when they are part of the design. Appliances, textiles, decoration or removal of previous furniture are only considered included if they expressly appear in the proposal.
Plumbing, electricity, masonry, painting, flooring and a comprehensive renovation of the home are not included in the service. If the project requires coordination with these works, it is identified before manufacturing and it is left in writing who is responsible for each item.
Three scales, one methodology
Choose the level of furnishing your home needs
They are not closed rates. They are ways of ordering the project according to the number of rooms, the degree of personalisation and investment priorities.
Essential furniture
To concentrate the investment in the kitchen, wardrobes, living room and master bedroom, maintaining a compatible visual line between the pieces.
- priority rooms
- Essential storage
- Coordinated finishes
Complete home furnishing
For the main and supporting rooms to be developed as one project, with manufacture and fitting planned together.
- Whole-home scope
- quotation by room
- Coordinated fitting
bespoke Whole-home project
For homes with panelling, special furniture, mechanisms, complex openings or a level of detail that requires greater technical development.
- Non-standard solutions
- Special details and hardware
- Coordination with technical plans
From inquiry to delivery
This is how we develop a whole-home furnishing project
Each phase reduces uncertainty before the next. Measurements, design, materials and budget are validated before entering manufacturing.
- 01
First consultation
You tell us which home you want to furnish, the rooms, references, approximate budget and target date.
- 02
Visit and measurement
We review distribution, measurements, installations, access routes and characteristics that determine each piece of furniture.
- 03
Distribution proposal
We define what each room needs, how it is used and how it relates to the rest of the home.
- 04
Design and materials
We choose finishes, colours, hardware, openings, interior equipment and meeting details.
- 05
Detailed budget
We present the items by stay, materials, manufacturing, delivery and fitting for your approval.
- 06
Manufacturing
The parts are produced according to the measurements and specifications validated in the project.
- 07
Fitting and handover
We coordinate the installation of the rooms included, the adjustments and the final review of the set.
Documented projects
Whole-home project archive
Each project is published with photographs, approximate location, scope, materials and verifiable results.
Documentation in progress
The first comprehensive projects are being documented and will be published with data authorized by each client. We do not use invented examples to simulate experience: in the meantime, the best reference is how we work and what each proposal includes.
Complete housing gallery
Ideas to coordinate all rooms
Twelve references to visualize how the kitchen, wardrobes, living room, bedrooms, bathrooms and work areas can coexist within one coordinated proposal.
warm kitchenWooden fronts and mineral countertop
Functional kitchenCompact distribution and continuous storage
Integrated wardrobeCapacity without reloading the bedroom
Equipped dressing roomInteriors adapted to daily use
Coordinated living roomStorage, display and equipment
Mediterranean dining roomLight proportions and warm materials
Serene bedroomHeadboard, side tables and joint storage
Flexible roomFolding bed and free space during the day
Custom bathroomMaterials suitable for humidity and cleaning
Integrated laundryEquipment and storage organised in one front
Home officeWork, filing and wiring resolved neatly
Useful hallBench, support and storage in a shallow footprint
Consistency between rooms
Materials and finishes designed as a family
A Whole-home project does not require repeating exactly the same finish in each room. The key is to define a compatible palette: wood tones, lacquer colours, interiors, handles, profiles and hardware that can vary without losing continuity.
The selection also responds to use. A kitchen, a bathroom and a bedroom do not receive the same humidity, load or frequency of cleaning. That is why the support and finish are valued along with the location of the furniture.
- Technical melamines and laminates.
- Lacquered MDF and natural veneer.
- Wood, glass and mirrors when they fit into the design.
- Hardware, openings and accessories according to use.
Investment by real scope
How much does it cost to furnish a complete home in Finestrat?
There is No reliable figure without knowing the housing and scope. The budget depends on the number of rooms, measurements, amount of furniture, materials, fittings, equipment, manufacturing complexity, access and fitting.
To facilitate decisions, the review is organised by room and items. This way you can identify what is a priority, compare finishing alternatives and, if necessary, plan the project in phases without losing general coherence.
Price examples will only be published when they correspond to real and comparable projects. Until then, the useful reference is a prepared proposal for your home.
What you can expect: After the visit and measurement, you receive a quotation broken down by room and items, in writing and with no obligation, to compare alternatives and decide whether the project is executed completely or in phases.
Request an itemised quotationHousing and stays
Surface, distribution, number of rooms and number of elements.
Design and complexity
Special geometries, panelling, technical integration and level of detail.
Materials and hardware
Supports, finishes, mechanisms, accessories and confirmed lighting.
Logistics and fitting
Access, delivery, order of installation, adjustments and finishing.
Confirmed planning
How long does a whole-home furnishing project take?
The deadline depends on the number of rooms, materials, technical complexity, validations and installation conditions. The project goes through consultation, measurement, design, approval, manufacturing and fitting; each phase needs to close its decisions before moving forward.
After measuring and defining the scope, a plan is prepared with the expected milestones. We do not publish generic ranges because a home with four essential pieces and another with special furniture in all rooms do not require the same development.
If you need the home ready for a specific date - a move, handing over the keys or the start of a rental -, indicate this in the first consultation: the manufacturing and fitting order is organised based on that objective.
Specific advantages
Advantages of making all the furniture within the same project
Shared design language
A coherent palette of materials, colours, proportions and details between environments.
Better use of space
Storage needs are distributed between rooms, avoiding duplications and spaces without function.
Fewer interlocutors
Consultations on furniture, changes and fitting are centralized within the same scope.
Coordinated measurements
Steps, heights, openings and junctions are reviewed thinking about the entire home.
Controllable budget
The breakdown by room allows you to prioritise and compare alternatives before manufacturing.
Planned fitting
The order of delivery and installation is decided according to access, dependencies and condition of the home.
Does it fit what your home needs?
Ask for a no-obligation review: we review stays, priorities and budget before proposing anything.
A verifiable method
Why trust this approach to furnish your home?
The proposal is built around data that can be verified: measurements of the property, rooms included, approved decisions, chosen materials, budgeted items and fitting conditions.
- A common scope divided by room.
- Important decisions closed before manufacturing.
- Budget with identifiable items.
- Review of access and fitting from the beginning.
- The studio, workshop and guarantees documented on their own pages.
Reviews
Experiencias de proyectos a medida en Finestrat
A selection of experiences covering measuring, design, material choices, manufacture and fitting in Finestrat.
Local coverage
whole-home furnishing in Finestrat and surroundings
We propose projects in Finestrat capital and municipalities of the metropolitan area. Location, access and fitting conditions are reviewed before confirming the visit.
Finestrat →Finestrat Balcony →Finestrat Pueblo →Bahia Golf →La Cala de Finestrat →Sierra Cortina →Terra Marina →
See all service areas →
Before starting
Frequently asked questions about whole-home furnishing
These answers clarify the general scope. The specific conditions are confirmed in the proposal for each home.
What is the difference between whole-home furnishing and comprehensive renovation?＋
whole-home furnishing coordinates the furniture of several rooms. A comprehensive renovation can include demolition, masonry, electricity, plumbing, painting and flooring. These items are not assumed within the furniture unless expressly indicated.
Can only part of the home be furnished?＋
Yes. The project can concentrate on priority rooms and maintain a base of materials and criteria to expand the complex in another phase.
Does the service include 3D design?＋
The form of presentation is defined according to the scope. It may include visual or 3D documentation when it has been expressly contemplated in the proposal.
Do you work with new construction apartments?＋
Yes, the structure is designed for empty homes where it is necessary to coordinate kitchen, storage, living room, bedrooms and auxiliary spaces.
Can you work on the architect's plans?＋
The plans are used for initial planning. Before manufacturing, the necessary dimensions in the home are reviewed and the points that affect the furniture are coordinated.
Does all the furniture need to be custom made?＋
Not necessarily. The scope may combine custom parts with standard elements if the solution is functional, maintains consistency and is clearly identified.
Is the budget divided by rooms?＋
The recommended approach separates environments and items to understand cost, compare alternatives, and decide priorities before approving.
Are delivery and fitting included?＋
The proposal must expressly indicate manufacturing, delivery, fitting, adjustments and any special access conditions.
How long does the entire project take?＋
It depends on the rooms, materials, complexity and validations. After the survey and scope review, we provide a project-specific schedule.
Do you work outside Finestrat capital?＋
The planned coverage includes Finestrat and different municipalities in the metropolitan area. The location is confirmed before arranging the visit.
Can we choose materials and hardware?＋
Yes. Options compatible with the use, appearance, maintenance and budget of the rooms included are compared.
Do you remove old furniture?＋
Removal of existing furniture is not included as standard. Where feasible, it can be assessed and listed separately in the quotation.
A project grounded in the property
The practical questions behind a project in Finestrat
The useful part of an initial enquiry is not how polished it looks. It is whether it gives us enough truth about the room to ask the next, more focused question.
Begin with what is not working
A sketch is welcome, but it is not compulsory. A plan, room photographs and a practical list of priorities by area usually reveal enough to separate the immediate need from ideas that can wait.
For Finestrat, we also ask whether the property is occupied, being refurbished or waiting for handover. The answer changes what can be checked now and what must wait.
Geometry becomes useful when the brief is clear
An early width and height can rule out the wrong approach without pretending to be a workshop survey. Once the layout is credible, we verify the walls, levels and fixed elements that affect manufacture.
The survey is not a theatre of laser lines. Its value is the record that links a real wall to a specific drawing decision.
Choose from a shortlist, not a wall of samples
The project manager filters the options before presenting them. You see credible alternatives with an explanation of what changes in feel, upkeep and price—not a catalogue without context.
If two options are genuinely equivalent for the brief, we say so. Material advice should reduce uncertainty, not invent distinctions to justify a longer specification.
Fitting begins on paper
We note the route, surfaces that need protection and any other work still active in the property. That information gives the workshop a realistic assembly plan.
We also confirm where packaging and offcuts can be handled. It is a small logistical question with a noticeable effect on a tidy fitting day.
Price becomes useful when the assumptions are visible
Phasing can be sensible, particularly when several rooms are involved. What matters is deciding the sequence before one early choice limits a later room.
When comparing options, we keep the underlying layout stable. Otherwise a cheaper or dearer figure may be describing a different piece of furniture altogether.
One clear answer at a time
You will not be asked to approve everything at once. Layout comes before minor details; verified dimensions come before production; fitting arrangements are settled before delivery.
Clients should leave each stage knowing what they need to decide and what remains with us. Silence is not treated as approval.
Room-by-room planning
One project, eight different day-to-day routines
The project is easier to understand when it is divided by room. Priorities, open decisions and optional items can then be discussed without losing the overall direction.
Kitchen and daily routines
We map preparation, cooking, washing and food storage before arranging cabinets. The room should shorten ordinary journeys rather than merely fill every wall.
If an island is proposed, circulation and seating are tested first. Its size follows the clearances; the clearances do not get squeezed around a fashionable island.
Wardrobes by person, not by metre
A continuous wall of doors may look simple, but the interior should not repeat one bay endlessly. We vary the storage around reach, weight and frequency of use.
Top storage is useful for infrequent items, provided the lower sections remain comfortable. We avoid gaining theoretical litres that no one can reach.
Living room storage without visual noise
We begin with sightlines from the sofa and dining table. Equipment, ventilation and cable routes are then integrated without turning the wall into a technical panel.
The composition is checked against daylight in the Finestrat property. A very dark wall can feel elegant in one orientation and unnecessarily heavy in another.
Bedrooms that leave room to move
Children’s and guest rooms need to change over time. We look for adaptable storage before introducing highly specific built-in features.
Sockets and switches are coordinated early, particularly around headboards and floating bedside units. Surface wiring is not left as an installation-day compromise.
Bathrooms and utility areas
Bathroom furniture is exposed to wet hands, cleaning products and humidity. The specification has to support that routine at edges, joints and drawer interiors.
Appliance manufacturer clearances are respected, and doors are checked against nearby sanitaryware or walls.
A home office that closes down properly
The office brief records screens, paper, printer, charging and video calls. Storage is split between items used hourly and material that can sit behind closed doors.
Files used regularly stay within reach; archive storage can move higher or into an adjoining cupboard.
One delivery plan for the property
The largest panel in the scheme is checked against the smallest turn on the route. Module divisions are adjusted before the workshop commits to them.
For a project in Finestrat, address-specific restrictions are confirmed before delivery dates are fixed.
Phasing and investment priorities
The budget is divided by room and by priority. This shows where better hardware or a distinctive material matters and where a simpler answer is entirely adequate.
The final proposal records included rooms, optional items and exclusions. A coordinated project should reduce ambiguity, not simply increase its size.
First review
Tell us how you want to furnish your home
Send us the plans, some photographs or approximate measurements. We will review the rooms you want to include and prepare an initial project review.
- 01Indicates the type of property and the location.
- 02Select priority rooms.
- 03Attach plans or photos if you have them.